View all our industries

Our industries

Time to calibrate?

Secure your quality and reduce defects through Tool Calibration and Accredited Quality Assurance Calibration.​
power tool calibration, tool testing, metrology, machine capability test

Momentum Talks

Discover inspirational and engaging talks on Atlas Copco
Momentum Talks
Затваряне

Torque curves tell the whole story

2 минута(и) за четене Юли 22, 2021

‘The rundown’

The transition from pneumatic to electric tools brought manufacturing to the next level by:

  • improving quality
  • allowing more control
  • and expanding statistical capability.

This transition also gave us the ability to capture a high frequency of data points throughout the tightening process also called ‘the rundown.’ 

 

These data points are plotted on an XY axis, based on torque-angle or torque-time. A good process is repeatable and every fastenings’ torque/angle signature should look nearly identical to the ones before and after it. Slight deviations would indicate potential manufacturing defects that a torque controller may not recognize, depending on the tightening strategies used within that application.

A torque controller’s job is to control and measure the tightening process performed by a tool.

The torque controller is where one would configure an application’s upper and lower control limits, which then designate a fastening’s passing or failing rating by these parameters. 

False OK fastenings

Deviations from an expected torque trace can identify false OK fastenings. One type of false OK would be a tightening that falls in between the torque-angle lower and upper control limits, but also may present defect scenarios. 

Other issues such as cross-threading, bad seating, bolts stretching past elasticity – and even instances where a socket begins to wear – could all potentially pass as ‘good’ on a torque controller while harming build quality greatly.

Enter ToolsNet8

This is where Atlas Copco’s ToolsNet 8 software shines. The ToolsNet8 software can identify when even the slightest changes occur by comparing a reference trace to fastenings performed by that same parameter set.

ToolsNet 8 can then push notifications to the right team member; enabling them to act quickly before the product ever leaves the plant. This feature has returned value to many manufacturers by proactively recognizing potential defect scenarios before they can impact the brand’s reputation.  Download and read through the ToolsNet 8 Leaflet now for additional details.

Find out more about torque curves

✔︎ Валиден Невалиден номер Невалиден код на държавата Твърде късо Твърде дълго optional

This value reveals how much friction is left over when operators continue to turn the bolt with a torque wrench. Prevailing torque is often inevitable, and a part of the fastening process. However, it does still need to be addressed and overcome during tightening. In this article, we’ll discuss prevailing torque compensation strategies.

  • Industrial Assembly