The most silent compressor to power your working site
E-Air H185 VSD
72 - 174 psi 191 - 131 cfm
E-Air H250 VSD
72 - 174 psi 233 - 178 cfm
E-Air H450 VSD
72 - 190 psi 466-360 cfm
E-Air V1100 VSD
1286 - 795 cfm 72 -200 psi
Versatile solutions
Up to 14 bar thanks to the PACE controller
Low noise level perfect for residential areas
As low as 61 dB(A) , the same level as a normal conversation
Discover the range of E-Air VSD electric variable speed mobile compressor
For the right application, the benefits of going electric cannot be overstated: from improved noise levels to no diesel engine emissions; and from improved efficiency to simpler service. Why should you not go electric? As long as you have an electric power source on your site, the electric compressor will always be the most efficient solution.
Atlas Copco’s range of E-Air VSD compressor range is a game-changer when it comes to performance, energy-efficiency and versatility. The E-Air’s VSD motor is clean, compact, energy-efficient and quiet, while the compressors are easy to install and operate. No emissions, unrivaled efficiency, low noise levels and a plug-and-play design; you can take the E-Air anywhere.
Minimize operating costs with 50%
The integrated permanent magnet motors of the E-Air H250 VSD and E-Air H450 VSD are an in-house Atlas Copco development, ruggedized for outdoor applications. This motor has its windings potted in resin, so it's completely closed off against water and dust (IP 66).
The unique design of the permanent magnet motor and the variable speed drive, results in a VSD electric driven mobile compressor that is 50% more energy efficient than a fixed speed compressor in partial or unload conditions, the state compressors run in 90% of their life.
Plug-and-play versatile electric compressor
Every E-Air VSD is multiple compressors in one; thanks to integrated PACE technology. On the XC2003 controller, you can easy select the pressure your application requires from a wide pressure range.
The PACE controller increases the utilization rate of your compressor
Every E-Air VSD comes with PACE technology (Pressure Adjusted through Cognitive Electronics), an electronic pressure regulation system. You select the pressure in the compressor’s controller, your application dictates the flow, the PACE controller locks in and regulates the perfect combination. Setting the pressure is a matter of 3 clicks and you can choose a pressure at increments of 2 psi.
One compressor can cover the needs of various applications. From 72 psi to run a handheld tool, to 145 psi for sandblasting to up to 200 psi for cable blowing, all with one machine. A conventional, fixed speed compressor runs at a fixed pressure level, delivering a corresponding maximal flow rate. A PACE compressor however, can deliver additional flow at lower pressure settings. When the load goes down, PACE finetunes the motor speed accordingly, which saves energy... and money. Read more about PACE
Diesel versus electric mobile compressors; what are the differences?
Why should you select an electric air compressor?
When there is access to the electric grid, the advantages of going electric are multiple:
- Cheaper to operate compared to a diesel compressor
- Over 50% smaller compared to a diesel compressor with the same performance
- Low noise levels
- No CO2 emissions
- No diesel engine results in preventative maintenance only every 2000 hours/2 years