The hydraulic post and ground rod drivers can be used to drive road barriers, signposts, fences, and anchors. This is available with a built-in on/off valve or hose mounted remote on/off valve. With the hydraulic post puller, you can remove any pole, steel beam or tube with diameters up to 7.8 inches / 200 mm.
| High Performance |
Wooden or Steel Post | Multiple Driving Applications | Get a ten Ton Grip | Accessories |
| This post puller develops six tons of hydraulic pulling force. With the help of an optional separate hand lever, you boost the pulling force by an extra of four tons. | With hardened jaws and an automatic chain-tightening clamp, this post puller is ideal for removing all kinds of wooden or steel posts including IPE, HPE; UPE profiles and round/square steel tubes with diameters of up to 200 mm (8 in). | Post drive pullers can drive road barriers, tubes/profiles, signposts, fences, anchors, and ground rods. | Our post puller is your best choice when removing hard-to-reach crash barriers and road signs. | Available with a variety of accessories, giving each tool the utmost flexibility for any project. |
| Activation Type | By Trigger Level | |
| Weight | lbs | 38.58 |
| Impact Rate | BPM | 2300 |
| Driving Capacity | mm | 10-60 |
| Activation Type | By Trigger Level | |
| Weight | lbs | 70.54 |
| Impact Rate | BPM | 1680 |
| Driving Capacity | mm | 40-100 |
| Activation Type | By Trigger Level | |
| Weight | lbs | 70.54 |
| Impact Rate | BPM | 1680 |
| Driving Capacity | mm | 40-100 |
| Working Pressure | psi | 1,450-2,321 |
| Weight | lbs | 132 |
| Pulling Force | lbs | 13,228 |
| Lift Capacity per Stroke | mm | 12-200 |
