As of March 1st, we will not support this browser anymore. Please use one of the following supported browsers to continue visiting our website
22 May 2019
Temse, Belgium: when the engineers at Engineered Pressure Systems International (EPSI), specialist in high-pressure, isostatic equipment, were in need of a great amount of power for the testing of their installations, they immediately contacted Atlas Copco Rental Europe. As we had recently added the QAC 1450 ‘Twinpower’ to our fleet, we didn’t think twice: we delivered them twice!
To keep up with peak performances, this equipment needs testing as well. That takes power – about 3200 A to be exact, which is not available at the EPSI site. The units need to heat up before the densification can start: the material inside is much easier to manage when heated, sometimes even up to 2000°C! After heating, the pressing begins, which requires a lower current. Usually their installations are powered on the premises of their customers. During testing phases on their own construction yard, they call upon Atlas Copco Rental to provide them with temporary power on-site. We recently added the QAC 1450 Twinpower to our fleet and decided this would be the perfect match as 2 Twinpowers could easily supply 4000 A.
The EPSI outdoor site isn’t very large, which makes it a challenge to absolutely maximize the clever use of space. Twinpowers allow us to do just that. Putting just two Twinpowers on the spot instead of multiple machines not only decreases the use of valuable space – it also decreases transportation costs, as well as the amount of fuel needed by 5%.
The Twinpower makes for a sustainable way of working. You get the power you need, when you need it. In the first phase of testing, not an awful amount of power is needed just yet. In which case only one half of one Twinpower is used. When the ovens for heating are turned on however, the full power of both Twinpowers is necessary. After making an efficiency assessment together with our Sales Engineer and the engineers at EPSI, our project managers designed a tailor-made remote solution to fully control the different power phases.
In the end, this specific use of Twinpowers proved its worth! EPSI ran the tests smoothly, improving their installations before sale. And we saw the efficiency of our Twinpowers, built on experience and thought-out design, take shape. Double win, indeed!
Great ideas accelerate innovation. At Atlas Copco we have been turning industrial ideas into business-critical benefits since 1873. By listening to our customers and knowing their needs, we deliver value and innovate with the future in mind. Atlas Copco is based in Stockholm, Sweden with customers in more than 180 countries and about 37 000 employees. Revenues of BSEK 95/ 9 BEUR in 2018. Learn more at www.atlascopcogroup.com. Great ideas reinforce sustainable development. At Atlas Copco Specialty Rental we team up with our customers to set up state-of-the-art temporary air, power, flow, steam and nitrogen solutions. Our passionate experts have extended application as well as equipment knowledge. We understand our customers' needs and can provide a total solution for any industry, no matter if it is for emergencies or planned projects. We are a division of the Power Technique business area, headquartered in Boom, Belgium and offer specialty rental solutions under several brands around the globe.