The pump system consists of a centrifugal pump and a separator, which enables air to be separated from the liquid and be sucked by a vacuum pump - making automatic priming possible. Even with suction heights of several feet the machine rapidly evacuates the air from the suction pipe and starts to pump. Additionally, thanks to the enclosed impeller, the PAC range is also suitable for pumping liquids with solids in suspension with best possible efficiency.

The PAC H108 JD 325HP T4F for high-pressure applications, have been designed to reduce downtime and prolong lifespan, saving operational costs. 

This centrifugal pump can handle liquids containing solids of up to 3.5" in size. This makes it particularly well suited to industrial applications, such as water transfer in the oil and gas sector, quarrying and surface mining, construction, and municipal applications. Even with suction heights of several feet the machine rapidly evacuates the air from the suction pipe and starts to pump.

View and/or Download PAC H108 JD 325HP T4F:  Brochure / Datasheet


Model PAC H108
Qmax 6,400 USgpm
Hmax 360 ft
Q max eff. 4,270 USgpm
Eff. max 87%
Suction port 10" Flange - ANSI class 150
Delivery port 8" Flange - ANSI class 150
Impeller type Closed, 2 vane
Impeller diameter 17"
Solids handling 3.5"
Casing ASTM A536 ductile iron
Impeller ASTM A743 CA6NM
Wear ring ASTM A48 Class 20 grey iron
Wear plate ASTM A48 Class 20 Grey Iron + NBR rubber coating
Shaft AISI 630 stainless steel
Mechanical Seal faces Silicon carbide Vs Silicon carbide
Elastomers VITON
Check Valve ASTM A536 ductile iron + NBR rubber flap
Separator Steel
Priming System  
Vacuum pump  
Vacuum pump type Diaphragm
Nominal air capacity 50.0 cfm
Max vacuum - 26.6 inHg
Drives Link belt

Make John Deere
Model 6090HFC09
Type Diesel turbo common rail
Displacement 549 in³
No. cylinders 6
Cooling Liquid with radiator
Rpm type Variable
Max operating speed 1800 rpm
US emissions EPA Tier 4F
Starting Electric
Engine system voltage 24 V
Engine Power rating 325 HP
Control panel  
Model PW 750
  Manual operation
  Automatic operation: start-stop with transducers or floats
  FleetLink Optional
Technical data  
Material ASTM A36 steel
Coatings Epoxy powder, average thickness of 3 MIL
Features Lifting beam. Fork lift pockets. Pump access through hinged door. Protected PE fuel tank
Battery Acid charge Pb-Ca maintenance free, 24V - 1100 CCA
Fuel tank capacity 250 USG
DEF tank capacity - 14.8 USG
Fuel consumption 14.7 US Gal/hr @1,800 rpm @82% eff.
Dry weight 11,375 lbs
Wet weight 13,400 lbs


Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
Various 17" / 440 mm Enclosed 3.5" / 89 mm 1800 rpm 10" / 250 mm 8" / 200 mm 2

flow limits graph


Solids handling
Foot print
Polyethylene Fuel tank
The 17" impeller with 87% efficiency at B.E.P. provides best pumping result with minimal efforts Closed impeller type with solids handling capability of 3.5" for trouble free operation Best in class foot print for the transport of 3x PAC H108 pumps on same trailer. Semi cartridge seal and bolted front wear ring for easy service Corrosion-free PE tank provides longer lifetime and avoids tank cleaning due to oxidation

Applications & Use Cases


Water transfer in quarry and mine

Site dewatering is the process of taking and removing water from construction sites, quarries, mine shafts, or any other area. Extracting water from these areas is crucial to maintain a safe working environment as well as reduce any costly delays.

Due to the PAC's ability to handle pumping high volumes, this pump is able to displace not only water, but sewage, industrial waste, chemicals, and even some solid products.

Areas for site dewatering :

  • Quarries
  • Construction sites
  • Mine shafts
  • Municipalities


Allied Bypass

Bypass pumping involves maneuvering liquid (sewage, trash, water, etc.) around a damaged pipe without interrupting the flow of liquid while the repairs are underway. This process is critical for many rehab projects, as it allows for a pipe to be repaired or replaced without spillage on public or private property. Bypass pumping uses a PAC H, which is a centrifugal pump that can handle liquids containing solids of up to 3.5". Because of this, the PAC H pump is well suited for bypassing in construction, industrial, and municipal applications.

Bypass is common in these sectors:

  • Municipalities
  • Civil Construction
  • Industry

Water Transfer

pas dewatering pumps open frame application broad

Water transfer refers to the moving of water from one location to another, often to support hydraulic fracturing. The PAC H is a centrifugal pump that can handle heads up to 360ft , which makes it well suited for water transfer in the oil and gas sector, quarrying and surface mining, construction, and municipal applications.

The PAC H pump's design benefits make them well suited for water transfer. These pumps are able to be used often and on jobs where pumps must run continuously.

Water transfer is most common in the oil and gas sector.