LH hydraulic breaker
Outdoors - go wild
The HBP-breakers are made to handle high back pressure. It’s great for instance when working with a skid steer as a power source or if you are working with particularly long hoses.
Nous ne prenons plus en charge le navigateur que vous utilisez. Pour continuer à consulter notre site web, veuillez utiliser l'un des navigateurs pris en charge suivants.
The HBP-breakers are made to handle high back pressure. It’s great for instance when working with a skid steer as a power source or if you are working with particularly long hoses.
Low vibration values, low noise levels and slim design makes this breaker a tool to use for many years to come.
High power to weight ratio means you get more done with a smaller breaker.
The vibro reduction abilities of this breaker lets you work for more than 8 hours without risking injuries.
The LH220/230 E are among the best general purpose breaker available in the 23-28 kg range. They are commonly used with 5” asphalt chisels for road building and maintenance applications, but also work well in brickwork, frozen soil and concrete.
|
Type de brise-roche |
Vibro-reduced - HBP |
|
Poids, flexibles inclus |
28 kg 61,7 lb |
|
Longueur |
735 mm 29 inch |
|
Débit d'huile |
20 l/min - 30 l/min 5 gpm - 8 gpm |
|
Pression de service |
115 bar - 130 bar 1 668 psi - 1 885 psi |
|
Contre-pression, max. |
35 bar 508 psi |
|
Fréquence de frappe |
1 500 blows/min - 2 100 blows/min |
|
Seuil de vibrations 3 axes (ISO 28927-10) |
4,9 m/s² |
|
Niveau sonore garanti (2000/14/CE) |
107 dB(A) |
|
Niveau de pression sonore (ISO 11203) |
95 Lp. dB(A) |
|
Classe EHTMA |
C/D |
|
Taille de l'emmanchement : hexagonal |
25x108 mm - 1 x 4 1⁄4 inch ; 28x152 mm - 1 1⁄8 x 6 inch ; 28x160 mm - 1 1⁄8 x 6 1⁄4 inch ; 32x152 mm - 1 1⁄4 x 6 inch ; 32x160 mm - 1 1⁄4 x 6 1⁄4 inch |
|
25x108 mm - 1 x 4 1⁄4 po |
1801 3546 92 |
|
28x152 mm - 1 1⁄8 x 6 po |
1801 3546 93 |
|
28x160 mm - 1 1⁄8 x 6 1⁄4 po |
1801 3546 94 |
|
32x152 mm - 1 1⁄4 x 6 po |
1801 3546 95 |
|
32x160 mm - 1 1⁄4 x 6 1⁄4 po |
1801 3546 96 |
Centrales d'alimentation électriques, diesel et essence portables, compactes et légères
Les outils de travail Atlas Copco sont les seuls outils conçus, testés et approuvés pour une utilisation sur les brise-roche Atlas Copco.
Les kits Atlas Copco sont des ensembles de pièces de rechange pour les réparations et les opérations d'entretien les plus courantes, réunis dans une boîte.
Diviseur de débit d'huile et flexibles de rallonge
You can change the tools with ease and run all available tools with the same power pack or excavator.
101-2240 Argentia Road, Mississauga, ON L5N 2X7
