Close

The WEDA D100N drainage pump features a max head of up to 115ft, max flow of 6100USgpm, and can withstand solids of up to 0.47in.

 

The WEDA drainage pumps handle either clean or sand-laden water, even with small solid particles, with the best performance and efficiency. These pumps are particularly suitable for general dewatering applications, ground water, raw water, construction sites and harsh conditions on site.

 

View and/or Download WEDA D100N:  Brochure / Datasheet

TECHNICAL DATA

Product Code WEDA D100N
Installation  Portable drainage pump
Hydraulic range

N - normal head

Insulation class F (+155°C/+311°F) IEC 85
Protection class  IP68
Voltage variation  Max ± 5% of nominal voltage
Voltage imbalance Max 2% - between phases
Max start-stop Max 30 starts/hour
Cable

H07RN-F (20 m) or

SOOW AWG (65 ft)

Casted parts Corrosion resistant aluminum
Impeller High chrome iron, 55±5 HRC
Wear parts Cast iron
Strainer Galvanized steel
Shaft Stainless steel
O-rings  Rubber (NBR)
Main bearing 2 x single row ball bearing in oil
Mechanical seal Primary + secondary: SiC/SiC
Thermal contacts 140°C / 284°F
Options / accessories

Zinc anodes

Epoxy coating

Couplings (hose / NPT / ISO-G)

Pump raft

NSSHÖU screened cable

Solids handling, strainer hole  0.47 in
Liquid temperature Max 104°F
Depth of immersion Max 65 ft
Max liquid specific gravity 1.1
pH of the pumped liquid  pH 5–8
Weight and dimensions H - High Head 
Discharge connection (in) 10 
Hieght (in) 55.5
Width (in) 25.5
Diameter (in) 23.6
Weight (excl. cable) (lb) 1133

PERFORMANCE CURVES

POWER RATING

Rating 3 ph 
Power P1 80 kW
Power P2 90 HP
Shaft speed  1750 r.p.m.
460 V  119 A
575 V 95 A

Applications & Use Cases

Construction Sites

WEDA D range

WEDA D100N Drainage Pump is used for various general dewatering purposes on construction sites. During construction, it is crucial to remove shallow water and groundwater to keep the project on schedule. Overall, the Atlas Copco D100N Pump is portable and easy to move from site to site. 

 

Quarries

WEDA L application

Quarries require dewatering for a variety of reasons. In order to mine the aggregate for concrete and other construction materials, it needs to be sufficiently dry at the quarry. The D100N Pump can provide the dry sump needed for proper working conditions.