10 ขั้นสู่การผลิตที่เป็นมิตรต่อสิ่งแวดล้อมและมีประสิทธิภาพยิ่งขึ้น

การลดการปล่อยคาร์บอนเพื่อการผลิตที่เป็นมิตรต่อสิ่งแวดล้อม - ทุกอย่างที่คุณต้องรู้
10 ขั้นสู่การผลิตอากาศอัดที่เป็นมิตรต่อสิ่งแวดล้อม

ทุกสิ่งที่คุณต้องการทราบเกี่ยวกับกระบวนการลำเลียงแบบนิวแมติก

ค้นพบว่าคุณสามารถสร้างกระบวนการลำเลียงแบบนิวแมติกที่มีประสิทธิภาพมากขึ้นได้อย่างไร
3D images of blowers in cement plant
ปิด

Erection & Commissioning is the final and most critical phase of a new machine’s lifespan. Our experts ensure your set-up takes the best possible start 

    Contact us

Description

Turbo machine erection

Manufacturing customized turbomachinery is a challenging process. Everything needs to fit and work together. But that is done in a controlled environment – the workshop.

The challenge becomes even greater when the machine is shipped and has arrived at site – with the erection process as a first critical step outside the controlled environment.

Our experienced field service personnel makes sure that your machine is built up on site with the same accuracy and care it has been assembled with. This requires good management, in-depth knowledge and long-time experience.

Commissioning competence

After machine setup and alignment to feeding pipes and drives, comes the first start-up. Set points and surge lines are not yet set. Typical of a customized set-up, this step will be done during commissioning. In other words: The machine has not yet set up its own protective system, which makes this a critical phase requiring very careful handling.

Our experienced commissioning engineers support you here, setting up your machine to make it fully operational. With their in-depth knowledge of the machine and its controls, they ensure your operation is not only safe, but will also run with the highest performance levels.

Global expertise
Our field service experts are available to erect and commission your machine anywhere we deliver your equipment. Their extensive experience in Gas and Process ensures your set-up receives the best service during this critical phase.
Focus on your core tasks
When everyone is busy with the tasks at hand at your plant or construction site, it is good to have an experienced partner at your side taking complete care of the erection and commissioning. That’s where our dedicated Aftermarket team comes in.
Until all is running smoothly
A plant’s commissioning process is a sensitive matter. Unforeseen situations are likely. Our commitment is guaranteed until your set-up is running smoothly.
Preventive Maintenance
Two handsome sailors on sailboat
Preventive Maintenance
Genuine parts
Genuine parts
Preventative maintenance and top performance with genuine spare parts from the company that knows your Atlas Copco gas and process turbomachinery inside and out .
 
Preventative maintenance and top performance with genuine spare parts from the company that knows your Atlas Copco gas and process turbomachinery inside and out .

Specification

Downloads

Related products