Quicker
The SRB HA battery powered nutrunner uses industry proven Tensor motor technology to deliver the highest tightening speeds available in a continuous rotation battery tool. This reduces process times and cuts costs.
Safer
The SRB HA high torque battery nutrunner is the only tool on the market with a fully integrated twin trigger that eliminates the most common operator injury, finger pinch points.
Smarter
Integrated torque and angle transducers secure that all tightenings are done correctly and all data is recorded, while operator feedback on the tool reduces mistakes at source.
The story of the SRB HA battery powered nutrunner
Watch the story of the SRB HA high torque smart battery powered nutrunner. From where the idea was born, to the care and consideration that went into each decision when creating and manufacturing the tool. Understand the tool from different aspects, and how Atlas Copco are taking the smart factory to the field.
Quicker, Safer and Smarter
The SRB HA is the worlds most productive battery powered nutrunner, with features added to make it quicker, safer and smarter than it's competitors. The SRB HA uses industry proven tensor motor technology to deliver the highest tightening speed. The nutunner is also equipped with a dual trigger to minimize the risk of injury, the only one of it's kind on the market.
Three different versions
Digital
Set and go straight from the box
The digital version is our basic version where the tool is ready to go straight out of the box. Use the buttons to set the desired torque and start tightening. No possibility to save the tightening data.
Smart
Connects directly to any mobile device
Pre-program up to 10 presets and 10 batches to control your process. The target can be either torque or torque plus angle. Easily shift between the settings and once the job is done, it is simple to download the data for traceability. No additonal app, software or Wifi network is needed.
Connected
Advanced process control and live data feed
Connect your battery tool to the Power Focus 6000 controller, which takes your productivity, quality and connectivity to entirely new levels. The PF6000 controller is easily integrated into overlying systems for live data feed and analysis.
Technical Information
Model |
SD |
TR Nm |
S rpm |
W Kg |
L mm |
CSD mm |
S |
SRB81-1300 HA |
¾” |
390-1300 |
23 |
5.5 |
378 |
32 |
n/a |
SRB81-2400-HA |
1” |
720-2400 |
11 |
6.8 |
428 |
35.5 |
n/a |
SRB81-3400-HA |
1” |
1020-3400 |
7 |
8.5 |
441 |
55.5 |
n/a |
SRB81-4000-HA |
1” |
1200-4000 |
5 |
8.5 |
441 |
55.5 |
n/a |
SRB81-6500-38-HA |
1-1/2” |
1950-6500 |
2.6 |
10.7 |
491 |
53 |
n/a |
SRB81-200-20 |
¾” |
60-200 |
138 |
4.4 |
339 |
32.5 |
3 |
SRB81-200-20-D |
¾” |
60-200 |
138 |
4.4 |
339 |
32.5 |
3 |
SRB81-300-20 |
¾” |
90-300 |
102 |
4.4 |
339 |
32.5 |
3 |
SRB81-300-20-D |
¾” |
90-300 |
102 |
4.4 |
339 |
32.5 |
3 |
SRB81-500-20 |
¾” |
150-500 |
66 |
5.4 |
370 |
33.5 |
4 |
SRB81-500-20-D |
¾” |
150-500 |
66 |
5.4 |
370 |
33.5 |
4 |
SRB81-750-25 |
1” |
225-750 |
46 |
5.7 |
389 |
33.5 |
5 |
SRB81-750-25-D |
1” |
225-750 |
46 |
5.7 |
389 |
33.5 |
5 |
SRB81-950-25 |
1” |
285-950 |
35 |
5.04 |
398 |
33.5 |
5 |
SRB81-950-25-D |
1” |
285-950 |
35 |
5.04 |
398 |
33.5 |
5 |
SD = Square Drive | TR Nm = Torque Range NM | S rpm = Speed RPM W Kg = Weight Kg
L mm = Length mm | CS D mm = CS distance mm* | S = Spline
Feature Table
| Feature / Model | Digital | Smart | Connected |
| Dual Trigger | ✔ | ✔ | ✔ |
| Socket Release | ✔ | ✔ | ✔ |
| Guiding LED Feedback | ✔ | ✔ | ✔ |
| Torque Transducer | ✔ | ✔ | ✔ |
| Permanent Magnet Motor | ✔ | ✔ | ✔ |
| HMI Display | ✔ | ✔ | ✔ |
| Internal Wifi Server for Data Collection | ✔ | ✔ | |
| Data Collection | ✔ | ✔ | |
| Presets (10) | ✔ | ✔ | |
| Batch Mode (10) | ✔ | ✔ | |
| Angle Monitoring | ✔ | ✔ | |
| Torque + Angle Strategy | ✔ | ✔ | |
| Torque Tolerances | ✔ | ✔ | |
| Live Data Collection | ✔ | ||
| Operator guidance | ✔ | ||
| SQS Configuration | ✔ | ||
| PF6000 Configuration | ✔ |
Savings of over £40,000 per year
A highly competitive company producing pressure vessels within the oil and gas sector required a method where they could control the torque. Their current method was using a maunual torque wrench. Not only were they unable to control the torque to a high degree of accuracy, but it also took a lot of time.
The bolting process consisted of 300 x 24" bolts, which took three operators a total of 4 hours to complete. For the disassembly process, it took two operators a further 2 hours to complete. This method also resulted in two safety incidents per year, which the company wanted to eradicate from their business.
We introduced the SRB HA battery nutrunner with its integrated torque transducer to control the torque. The high speed motor improved productivity and the dual trigger function reduced risk of injuries.
With the SRB HA solution in place, it was calculated that the company would save over £40,000 per year due to the quicker process the tool can supply.
SRB HA improves wind operations
Atlas Copco introduced the Battery Nutrunner SRB HA as a solution for the application, and compared it to the current method. With the SRB HA in practice it proved to be the much quicker method and the company calculated they could free up one operator with the SRB HA in place.
Going forward with the SRB HA as the solution, one of the world leading wind energy companies will be able to save time and money for the whole process, making it a quicker, safer and smarter place to work.
Ordering Numbers
Model |
Ordering No. Tool |
Ordering No. Tool Kit |
ETP SRB81-1300-20-HA-D |
8433 2506 01 |
8433 2506 81 |
ETP SRB81-1300-20-HA |
8433 2506 11 |
8433 2506 91 |
ETP SRB81-2400-25-HA-D |
8433 2507 01 |
8433 2507 81 |
ETP SRB81-2400-25-HA |
8433 2507 11 |
8433 2507 91 |
ETP SRB81-3400-25-HA-D |
8433 2500 01 |
8433 2500 81 |
ETP SRB81-3400-25-HA |
8433 2500 11 |
8433 2500 91 |
ETP SRB81-4000-25-HA-D |
8433 2508 01 |
8433 2508 81 |
ETP SRB81-4000-25-HA |
8433 2508 11 |
8433 2508 91 |
ETP SRB81-6500-38-HA |
8433 2510 11 |
N/A |
ETP SRB81-6500-38-HA-D |
8433 2510 01 |
N/A |
ETP SRB81-200-20 |
8433 2501 11 |
N/A |
ETP SRB81-200-20-D |
8433 2501 01 |
N/A |
ETP SRB81-300-20 |
8433 2502 11 |
N/A |
ETP SRB81-300-20-D |
8433 2502 01 |
N/A |
ETP SRB81-500-20 |
8433 2503 11 |
N/A |
ETP SRB81-500-20-D |
8433 2503 01 |
N/A |
ETP SRB81-750-25 |
8433 2504 11 |
N/A |
ETP SRB81-750-25-D |
8433 2504 01 |
N/A |
ETP SRB81-950-25 |
8433 2595 11 |
N/A |
ETP SRB81-950-25-D |
8433 2595 01 |
N/A |
HA - D - Digital version
HA - Smart version / Smart Connected version
Tool kit includes; tool, case, charger, 2 batteries and S-type reaction bar
SRB HA - Accessories
| Bar type | Spline type | Wave type | Max Torque [Nm] | Dimensions [mm] | CC Distance [mm] | Ordering number |
| Steel bar | n/a | 40 | 1300 | 502 x 48 x 16 | n/a | 4210 4757 90 |
| n/a | 47 | 2400 | 545 x 54 x 20 | n/a | 4210 4757 93 | |
| n/a | 60 | 4000 | 620 x 80 x 20 | n/a | 4210 4757 85 | |
| 3 | n/a | 300 | 400/56/12 | n/a | 4210 2219 80 | |
| 4 | n/a | 500 | 500/62/15 | n/a | 4210 2183 80 | |
| 5 | n/a | 1000 | 500/62/15 | n/a | 4210 2726 80 | |
| S-Type reaction bar | n/a | 40 | 1300 | n/a | n/a | 4210 4480 90 |
| n/a | 47 | 2400 | n/a | n/a | 4210 4480 94 | |
| n/a | 60 | 4000 | n/a | n/a | 4210 4480 85 | |
| 3 | n/a | 300 | n/a | n/a | 4210 4480 03 | |
| 4 | n/a | 500 | n/a | n/a | 4210 4480 04 | |
| 5 | n/a | 1000 | n/a | n/a | 4210 4480 05 | |
| Sliding drive | n/a | 40 | 1300 | n/a | 76-191 | 4210 4752 90 |
| n/a | 47 | 2400 | n/a | 81-182 | 4210 4752 93 | |
| n/a | 60 | 4000 | n/a | 84-199 | 4210 4752 85 | |
| 3 | n/a | 170 | 1/2 | 70-120 | 4210 4481 98 | |
| 3 | n/a | 300 | 3/4 | 70-120 | 4210 4481 93 | |
| 3 | n/a | 170 | 1/2 | 82-218 | 4210 4616 98 | |
| 3 | n/a | 240 | 3/4 | 82-218 | 4210 4616 93 | |
| 4 | n/a | 500 | 3/4 | 76-126 | 4210 4481 94 | |
| 4 | n/a | 500 | 3/4 | 82-218 | 4210 4616 94 | |
| 5 | n/a | 900 | 1 | 80-125 | 4210 4481 95 | |
| 5 | n/a | 900 | 1 | 82-218 | 4210 4616 95 | |
| Square bracket | n/a | 40 | 1300 | 64 x 120 | n/a | 4210 4758 90 |
| n/a | 47 | 2400 | 71 x 120 | n/a | 4210 4758 93 | |
| n/a | 60 | 4000 | 101 x 180 | n/a | 4210 4758 85 | |
| Square steel bracket | 3 | n/a | 300 | 100/50/12 | n/a | 4210 2219 03 |
| 4 | n/a | 500 | 125/65/16 | n/a | 4210 2183 01 | |
| 5 | n/a | 1000 | 125/65/16 | n/a | 4210 2726 01 | |
| Triangular steel bracket | 3 | n/a | 300 | 82/80/15 | n/a | 4220 2137 03 |
| L-Type aluminum bar | 3 | n/a | 200 | 266x300/29/15 | n/a | 4210 2219 08 |
| 4 | n/a | 500 | 144x150/42/15 | n/a | 4210 2183 08 | |
| Straight aluminum bar | 3 | n/a | 125 | L = 400 | n/a | 4210 2219 81 |
| Extended sliding drive | 5 | n/a | 700 | 1 | 68-112 | 4210 4498 90 |
| Extended sliding tube | 5 | n/a | 700 | 1 | 68-112 | 4210 4498 92 |
| Battery /Charger | Ordering Number |
| Battery Li-Ion 36V 2.6 Ah | 4211 6030 86 |
| Multicharger 18-36V | 4211 6083 84 |
| Protective cover 36V | 4211 6090 36 |
| Tool protective cover (Included with tool) | 4216 4271 02 |
Frequently asked questions
In what format can I get the data and what is the content?
You can receive the data to laptop or directly to a mobile device, and download a CSV file. In the file you can see the following data: time and date, barcode number, tool serial number, target torque, final torque, target angle, final angle, torque unit.
Can I get live data via mobile device?
Real time live data is available with the connected version, whereby tightening data is transferred out as it takes place. However, data is captured and recorded in real time within the smart tool nut cannot be transferred until the tool is connected to a mobile device.
Do all models have an internal WiFi Server?
Only 'smart' and 'connected' models have the built in WiFi server. This enables these models to connect directly to any mobile device. 'Digital' model is stand alone, and does not have the ability to connect an external mobile device. However, digital model can be upgraded to 'smart' version by contacting your Atlas Copco representative.
Does the dual trigger come as standard?
Yes, in Atlas Copco we believe that worker safety is the most important priority so all tools come supplied with fully integrated dual trigger as standard. If there is a demand to use the tool without the dual trigger, the tool can be modified. Please contact you Atlas Copco representative.
How many cycles can be achieved with one battery charge?
Battery life is very much dependant on joint type and working temperatures. As such the range can be quite wide, but can also be optimised by the tightening strategy used to programme the tool. During testing we have found the battery life to be significantly higher than competitor brands when comparing like for like conditions. We're happy to provide live demonstrations on your applications to validate this.
- SRBHA Battery Nutrunners leaflet 5.1 MB, PDF
