Bolt Materials - Atlas Copco Schweiz
Atlas Copco Schweiz - Industrial Tools & Solutions
Unsere Lösungen
Industrial Tools & Solutions
Lösungen
Für die Branchen
Industrial Tools & Solutions
Power Technique
Lösungen
Produkte
Power Technique
Energiespeichersysteme
Specialty Rental
Lösungen
Kompressoren
Lösungen
Produkte
Kompressoren
Produkte und Lösungen
Lösungen
Bohrmaschinen
Produkte und Lösungen
Energiespeichersysteme
Produkte und Lösungen
Application of topside tensioners

Bolt Materials

Request Software

The software assumes that adequate strength flange materials are being used. Stainless Steel 316 flanges are not to be tensioned with the recommended bolt stresses.
The software assumes that adequate strength flange materials are being used. Stainless Steel 316 flanges are not to be tensioned with the recommended bolt stresses.
Standard ANSI B16.5 Flanges manufactured from material with yield strength equal to or greater than 247N/mm2 (35840lbs/In2) ANSI B16.5 Flange specification does not implicitly specify a minimum target bolt stress. The software will suggest recommended target bolt stress values for these flanges. The recommended values are based on the experience of Tentec Limited and are used without any guarantee or liability to Tentec Limited. The recommended bolt stress values assume that flange material yield strength is equal to or greater than 247N/mm2 (35840lbs/In2).
 
Standard ANSI B16.5 Flanges manufactured from material with yield strength equal to or greater than 247N/mm2 (35840lbs/In2) ANSI B16.5 Flange specification does not implicitly specify a minimum target bolt stress. The software will suggest recommended target bolt stress values for these flanges. The recommended values are based on the experience of Tentec Limited and are used without any guarantee or liability to Tentec Limited. The recommended bolt stress values assume that flange material yield strength is equal to or greater than 247N/mm2 (35840lbs/In2).
The following flange materials or equivalents are suitable for the recommended bolt stresses.
The following flange materials or equivalents are suitable for the recommended bolt stresses.
  • ASTM A105
  • ASTM A182 Grades F65
  • ASTM A182 Grade F60
  • ASTM A182 Grade F52
  • ASTM A182 Grade F50
  • ASTM A182 Grade F51
  • ASTM A350 Grade LF2
  • ASTM A350 Grade LF3
  • ASTM A694 Grade F52
  • ASTM A694 Grade F60
  • ASTM A694 Grade F65
 
  • ASTM A105
  • ASTM A182 Grades F65
  • ASTM A182 Grade F60
  • ASTM A182 Grade F52
  • ASTM A182 Grade F50
  • ASTM A182 Grade F51
  • ASTM A350 Grade LF2
  • ASTM A350 Grade LF3
  • ASTM A694 Grade F52
  • ASTM A694 Grade F60
  • ASTM A694 Grade F65