The PAS 100 HF T4F YD for high-pressure applications, have been designed to reduce downtime and prolong lifespan, saving operational costs.
The PAS 100 HF Atlas Copco pump is designed to withstand toughest applications and delivers best in class pumping efficiency. One of the most common area of utilization is the Construction dewatering and municipal market segment where reliability, serviceability and versatility is the key to provide a customized solution. Other suitable applications can be found within the Industry, Mining or Oil & Gas segment. Atlas Copco pumps are packed with features that not only meet, but exceed the needs of our customers.
View and/or Download PAS 100 HF T4F YD: Datasheet
The pump system consists of a centrifugal pump and a separator, which enables air to be separated from the liquid and be sucked by a vacuum pump - making automatic priming possible. Even with suction heights of several feet the machine rapidly evacuates the air from the suction pipe and starts to pump. Additionally, thanks to the semi-open impeller, the PAS HF range is also suitable for pumping liquids with solids in suspension.
Speed | Impeller Dia. | Style | Solids Dia. | Ns | Suction | Discharge | No. Vanes |
Various | 10" / 250 mm | Semi-Open | 1.8" / 4.5 mm | 2,200 rpm | 4" / 100 mm | 4" / 100 mm | 2 |
Pump | |
---|---|
Model | PAC H64 |
Qmax | 1,950 USgpm |
Hmax | 500 ft |
Q max eff. | 2,340 USgpm |
Eff. max | 69 % |
Suction port | 6" Flange - ANSI class 150 |
Delivery port | 4" Flange - ANSI class 150 |
Impeller type | Enclosed, 2 vane |
Impeller diameter | 17" |
Solids handling | 3" |
Material | |
Casing | ASTM A536 ductile iron |
Impeller | ASTM A743 CA6NM |
Wear Plates | EN-GJL-200 cast iron |
Shaft | 39NiCrMo4 steel |
Mechanical Seal faces | Tungsten carbide / Tungsten carbide |
Elastomers | VITON |
Check Valve | ASTM A536 ductile iron + NBR rubber flap |
Separator | EN-GJL-200 cast iron |
Priming System | |
Vacuum pump | |
Vacuum pump type | Diaphragm |
Nominal air capacity | 29.6 cfm |
Max vacuum | - 26.6 inHg |
Drives | Link belt |
Engine | |
---|---|
Make | John Deere |
Model | 3TNV88 |
Type | Diesel common rail |
Displacement | 1.6 Liter (549 in³) |
No. cylinders | 3 |
Cooling | Liquid with radiator |
Rpm type | Variable |
Max operating speed | 2.200 rpm |
US emissions | EPA Tier 4F |
Starting | Electric |
Engine system voltage | 12 V |
Engine Power rating | 25 HP |
Control panel | |
Model | PW 750 |
Manual operation | |
Automatic operation: start-stop with transducers or floats | |
FleetLink Optional | |
Arrangement | |
Technical data | |
Material | ASTM A36 steel |
Coatings | Epoxy powder, average thickness of 3 MIL |
Features | Lifting beam, PE-Fuel tank and Fender |
Battery | Acid charge Pb-Ca maintenance free, 12 V - 630 CCA |
Fuel tank capacity | 60 USG Net Volume |
DEF tank capacity | 46.7 USG |
Fuel consumption | 1.0 US Gal/hr @2,200rpm @BEP |
Dry weight | 2250 lbs |
Wet weight | 2800 lbs |
Efficiency The 10" impeller with 70% efficiency at B.E.P. provides best pumping result with minimal efforts |
Solids handling Semi-open impeller type with solids handling capability of 3" for trouble free operation |
Easy Maintanence Hinged cover for direct access to the impeller and pump volute |
Corrosion-free PE tank provides longer lifetime and avoids tank cleaning due to oxidation |