Pure oxygen laser cutting is slow and leaves an oxide layer that may need to be removed. Working with pure nitrogen is faster and gives clean edges but can require deburring. The Atlas Copco LC MIX gives you the best of both worlds. By blending the right amount of oxygen into nitrogen, our gas mixer helps keep your laser cutting clean, sharp and fast.
Mixing high-pressure nitrogen and oxygen for laser cutting, the LC MIX helps combine speed and efficiency with quality and a clean finish. The compact and simple package takes up very little room and requires minimal service, offering the easiest way to optimize your laser cutting performance and results.
LC MIX+ (Automatic)
LC MIX (Manual)
Measurement |
Min outlet capacity |
Max outlet capacity |
Max inlet pressure N2 |
Max inlet pressure O2 |
Max outlet pressure mix |
Purity range (N2 purity*) |
Power supply (Automatic version) |
Pressure drop |
Inlet / outlet connections |
Dimensions (L x W x H) |
Mass** |
Metric |
20 Nm3/h |
120 Nm3/h |
34 Barg |
33 Barg |
31 Barg |
79-99.5% |
230v 50 Hz |
2-4 Barg |
½” BSP Cone male |
0.6x0.6x0.8m |
80 kg |
Imperial |
12 cfm |
71 cfm |
493 psig |
478.5 psig |
449.5 psig |
79-99.5% |
110v 60 Hz |
29-58 psig |
½” BSP Cone male |
23.6x23.6x31.5" |
176 lbs |
15 June, 2022
Nitrogen plays a big role in various industrial applications. This e-book on nitrogen generation will help you understand the growing trend of on-site nitrogen generation and how this will benefit your business.
