Drying Compressed Air Using Over-compression - Atlas Copco Taiwan
Atlas Copco Taiwan - 空壓機
Our solutions
工業工具與解決方案
Solutions
Power Technique
Solutions
空壓機
Solutions
產品
空壓機
產品與解決方案
Solutions
訓練動作
產品與解決方案
Energy Storage Systems

Drying Compressed Air Using Over-compression

Compressed Air Wiki Air Treatment Drying

All atmospheric air contains some amount of water vapor. When air is compressed, the water concentration increases. To avoid future problems in the compressor installation, the compressed air needs to be treated. In this article we talk about drying the air by over-compression.

What is over-compression?

over compression is a drying technique

Over-compression is perhaps the easiest method for drying compressed air. Air is first compressed to a higher pressure than the intended working pressure, which means that the concentration of water vapor increases. Thereafter the air is cooled and the water is separated as a result. Finally, the air is allowed to expand to the working pressure, and a lower PDP is attained. However, this method is only suitable for very small air flow rates, due to its high energy consumption.

這本關於壓縮空氣乾燥機的電子書將告訴您所有關於濕氣的資訊,以及乾燥機在空氣處理方面的重要性。 

您是否有特定的問題,或是想要與專家聯絡?請按一下下方按鈕,我們會盡快與您聯絡。

Related articles

an illustration about air treatment for the atlas copco wiki pages

How to Remove Contaminants from Compressed Air?

27 September, 2022

A number of decisions must be made when installing a compressed air system for it to provide the right air quality. Let us take a look at how to remove harmful contaminants, like water vapor and oil, from the output air.