Our Solutions
Equipements d'alimentation en énergie
Solutions
Equipements d'alimentation en énergie
Equipements d'alimentation en énergie
Equipements d'alimentation en énergie
Outils et Solutions pour l'Industrie
Solutions
Outils et Solutions pour l'Industrie
Outils et Solutions pour l'Industrie
Outils et Solutions pour l'Industrie
Outils et Solutions pour l'Industrie
Solutions de vide
Solutions
Solutions de vide

Vacuum Pumps, Booster Compressors and Pressure Intensifiers

Other Compressors Compressor Types Compressed Air Wiki Compressors

There are a lot of compressor types that you might not have known about before. Here we will show you some these “other” kinds of compressors: the vacuum pump, booster compressor and pressure intensifier.

What are vacuum pumps?

a vacuum pump

A vacuum signifies a pressure lower than atmospheric pressure. A vacuum pump is a compressor that compresses a vacuum to higher pressures, generally to atmospheric pressure. A typical characteristic of a vacuum pump is that it works with a very high pressure ratio. This explains why multistage machines are common. Multi-stage air compressors can also be used for vacuums within the pressure range 1 bar(a) and 0.1 bar(a).

What are booster compressors?

A booster compressor is a compressor that compresses compressed air to a much higher pressure. It may be used to compensate the pressure drop in long pipelines or for applications in which a higher pressure is required for a sub-process. Booster compressors may be single-stage or multi-stage and can be of a dynamic or displacement type, but piston compressors are the most common. The power requirement for a booster compressor increases as the pressure ratio rises, whereas the mass flow drops. The curve for power requirement as a function of the inlet pressure has the same general form as the curve for a vacuum pump.

What are pressure intensifiers?

Pressure intensifiers are a form of booster compressors, driven by the compressed air medium itself (called the propellant). They can increase the pressure in a medium for special applications: for laboratory tests of valves, pipes and hoses. A pressure of 7 bar can be amplified in a single stage to 200 bar or up to 1700 bar in multi-staged equipment.

The pressure intensifier is only available for very small flows. When the propellant flows in, the low-pressure piston is pressed downwards and forces the medium in the high-pressure compression chamber out under high pressure. The intensifier can work in a cycling process, up to a pressed pressure level. All inert gases can be compressed in this way. Air can also be compressed in a pressure intensifier, but must be completely oil-free to avoid self-ignition.

Related articles