Produsen Jerman dapat menikmati proses memanggang yang lebih efisien berkat Optimizer 4.0
Produsen ini bertransisi ke solusi Atlas Copco dalam beberapa tahun terakhir dan mencapai penghematan energi sebesar 20% dalam tagihan listrik mereka!
Central controllers further increase the efficiency of the whole air compressor system by actively managing the integrated machines in their most optimum points possible. They reduce your energy consumption and optimize your maintenance needs.
The controllers are ready for Industry 4.0, or the Internet of Things, and are designed for smart factories.
It's all about efficiency, reliability and connectivity. Our devices can:
Without our compressor controllers, the load/unload pressure of each unit must be set to react to changes in air demand. If the system pressure drops, an additional compressor will switch to loaded running. However, the sequence will always be the same, and this leads to a higher pressure than required (the higher the pressure, the higher the energy cost). Furthermore, the advantages of VSD or centrifugal machines are not fully used.
Our central controllers can be set to prevent unequal wear of compressors, equalizing the running hours on multiple machines for more efficient service scheduling and reduced cost. Moreover, VSD and centrifugal units will run at the optimum point whenever possible.
Title
File
Produsen ini bertransisi ke solusi Atlas Copco dalam beberapa tahun terakhir dan mencapai penghematan energi sebesar 20% dalam tagihan listrik mereka!