Northumbrian Water opts for energy-efficient ZS screw blower - Atlas Copco Taiwan
Atlas Copco Taiwan - 空壓機
Power Technique
Energy Storage Systems

Northumbrian Water opts for energy-efficient ZS screw blower

Northumbrian Water, a leading provider of water and sewerage services in the North East of England, has chosen Atlas Copco ZS screw blower technology to help reduce energy consumption and minimise service costs at its sewage treatment works in Newton Aycliffe, County Durham.

ZS screw blowers outside installation_Northumbrian Water
The company, which has been awarded the ‘Queens Award for Enterprise: Sustainable Development’ and ‘Water Company of the Year’ previously, needs a constant, reliable supply of air in the region of 480mbar for aerobic treatment of waste water at its site in Newton Aycliffe. This process uses bacteria to break up waste particles and requires large amounts of air to be blown into the aeration tanks to maintain the desired level of dissolved oxygen within the wastewater containment system - a biological process that typically utilises up to 70% of the energy consumed on site. There is a changing perspective within the water industry that the widely-used lobe blower design principle no longer meets the needs of today’s low carbon economy and that operators can benefit substantially from energy savings through the replacement of conventional lobe equipment with innovative screw technology.

Atlas Copco ZS screw blowers helped us improved with 20% on energy usage, so we decided to replace all our conventional lobe blowers with Atlas Copco screw blowers.

Alan Harle , Northumbrian Water engineer who conducted the comparison tests.

Screw versus lobe comparison performance test

Northumbrian Water aeration basin
Northumbrian Water decided to replace one lobe blower with the Atlas Copco ZS screw blower technology. On completion of the installation of the new ZS blower, Northumbrian Water carried out a comparison performance test between the existing lobe blowers and Atlas Copco’s ZS technology. It revealed that the existing lobe blower used approx. 19% more power for the same output. Based on these test results and continuous reliability issues with the lobe blowers it was decided to replace a second lobe blower with an Atlas Copco ZS90-VSD, low-pressure, oil-free rotary screw blower. The blower unit comprises a complete package based on a simple internal principle: precision timing gears maintain minute clearances between two intermeshing dry screw elements that never touch. No lubrication is required in the compression space and specially designed seals prevent any rotor bearing oil from entering the compression chamber. Intake air is compressed between the rotors and their housing and oil-free, pulsation-free air at pressures of approx. 480 mbar is delivered at an output rate of more than 4000m3/hr dependent upon process demand.

Convincing results: lobe technology replaced over the whole customer site

Northumbrian Water has now placed a third order with Atlas Copco to replace the remaining two lobe units installed at Newton Aycliffe Waste Water Treatment Plant with a further two ZS 90 screw blowers. Alan Harle, the Northumbrian Water engineer who conducted the comparison tests, commented: “From an operational perspective, Atlas Copco’s ZS blowers have performed well, especially when compared with the incumbent blowers, and we are very pleased with the 20% improvement we have already seen. I would say that the proof is in the pudding and given that NWL have chosen to replace all blowers with the Atlas Copco units speaks volumes.”

Blowers Class 0 Compressor Technique 無油 迴轉式 Oil-free Air 智慧空氣解決方案 汙水處理 Compressor Technique