Bolt Materials - Atlas Copco Italia
Atlas Copco Italia - Utensili e Soluzioni Industriali
Le nostre soluzioni
Utensili e Soluzioni Industriali
Soluzioni
Industrie nostre clienti
Utensili e Soluzioni Industriali
Power Technique
Soluzioni
Prodotti
Power Technique
Sistemi di accumulo di energia
Compressori
Soluzioni
Prodotti
Compressori
Prodotti e soluzioni
Soluzioni
Trapani
Prodotti e soluzioni
Sistemi di accumulo di energia
Application of topside tensioners

Bolt Materials

Request Software

The software assumes that adequate strength flange materials are being used. Stainless Steel 316 flanges are not to be tensioned with the recommended bolt stresses.
The software assumes that adequate strength flange materials are being used. Stainless Steel 316 flanges are not to be tensioned with the recommended bolt stresses.
Standard ANSI B16.5 Flanges manufactured from material with yield strength equal to or greater than 247N/mm2 (35840lbs/In2) ANSI B16.5 Flange specification does not implicitly specify a minimum target bolt stress. The software will suggest recommended target bolt stress values for these flanges. The recommended values are based on the experience of Tentec Limited and are used without any guarantee or liability to Tentec Limited. The recommended bolt stress values assume that flange material yield strength is equal to or greater than 247N/mm2 (35840lbs/In2).
 
Standard ANSI B16.5 Flanges manufactured from material with yield strength equal to or greater than 247N/mm2 (35840lbs/In2) ANSI B16.5 Flange specification does not implicitly specify a minimum target bolt stress. The software will suggest recommended target bolt stress values for these flanges. The recommended values are based on the experience of Tentec Limited and are used without any guarantee or liability to Tentec Limited. The recommended bolt stress values assume that flange material yield strength is equal to or greater than 247N/mm2 (35840lbs/In2).
The following flange materials or equivalents are suitable for the recommended bolt stresses.
The following flange materials or equivalents are suitable for the recommended bolt stresses.
  • ASTM A105
  • ASTM A182 Grades F65
  • ASTM A182 Grade F60
  • ASTM A182 Grade F52
  • ASTM A182 Grade F50
  • ASTM A182 Grade F51
  • ASTM A350 Grade LF2
  • ASTM A350 Grade LF3
  • ASTM A694 Grade F52
  • ASTM A694 Grade F60
  • ASTM A694 Grade F65
 
  • ASTM A105
  • ASTM A182 Grades F65
  • ASTM A182 Grade F60
  • ASTM A182 Grade F52
  • ASTM A182 Grade F50
  • ASTM A182 Grade F51
  • ASTM A350 Grade LF2
  • ASTM A350 Grade LF3
  • ASTM A694 Grade F52
  • ASTM A694 Grade F60
  • ASTM A694 Grade F65