The Cost of Compressed Air - Atlas Copco Taiwan
Atlas Copco Taiwan - 空壓機
Our solutions
Power Technique
Energy Storage Systems

The Cost of Compressed Air

Compressed Air Wiki Compressor Economy Compressors

Electrical energy is the most prevalent energy source for industrial compressed air production. In many compressed air installations there are often significant and unutilized energy-saving possibilities including energy recovery, pressure reduction, leakage reduction and optimization of operations through correct choice of a control and regulation system as well as the choice of compressor size.

The production costs of compressed air

the production costs of compressed air can vary
When planning a new investment, it is best to look as far into the future as possible and attempt to assess the impacts of new situations and demands that might affect the compressed air installation. Typical examples include environmental demands, energy-saving demands, increased quality requirements from production and future production expansion investments. Optimized compressor operations are becoming more important, especially for larger, compressed air-dependent industries. Production will change over time in a developing industry and, consequently, so will compressor operation conditions. It is therefore important that the compressed air supply be based both on current requirements as well as on development plans for the future. Experience shows that an extensive and unbiased analysis of the operating situation will almost always result in improved overall economy.

Minimizing the energy cost of compressors

Energy costs are clearly the dominating factor for the installation's overall cost. It is therefore important to focus on finding solutions that comply with demands for performance and quality as well as the demand for efficient energy utilization. The added cost associated with acquiring compressors and other equipment that complies with both of these demands will be perceived over time as a good investment.

As energy consumption often represents approx. 80% of the overall cost, care should be taken in selecting the regulation system. The significant difference in the available regulation systems exceeds the significant differences in types of compressor. An ideal situation is when compressor full capacity is precisely matched to the application's air consumption. This frequently occurs in applications. Most types of compressors are supplied with their own on-board control and regulation system, but the addition of equipment for shared control with other compressors in the installation can further improve operating economy.

Speed regulation has proven to be a popular regulation method because of its substantial energy-saving potential. Think carefully and allow your application requirements to govern your selection of regulation equipment in order to obtain good results. If only a small amount of compressed air is required during the night and weekends, it may be profit-able to install a small compressor adapted to this off-peak requirement.

If, for some reason, a particular application needs a different working pressure, this requirement should be analyzed to find out whether all compressed air production should be centralized in a compressor central plant, or whether the network should be split up according to the different pressure levels. Sectioning of the compressed air network can also be considered to shut down certain sections during the night and on the weekends, in order to reduce air consumption or to allocate costs internally based on airflow measurements.

Cost allocation

Investment costs are a fixed cost that include the purchase price, building infrastructure costs, installation and insurance. The share of the investment cost as a part of the overall cost is determined partly by the selection of the compressed air quality level and partly by the depreciation period and the applicable interest rate. The share of energy costs is determined by annual operating time, the degree of load/unload utilization and the unit energy cost. Additional investments, for example, equipment for energy recovery, offer a direct payoff in the form of reduced operating and maintenance costs.

壓縮空氣結合電力、水和氣體,讓我們的世界運轉起來。我們不一定常看到壓縮空氣,但它就在我們身邊。由於壓縮空氣有許多不同的用途 (和需求),因此壓縮機現在才有各種不同的類型和尺寸可供選擇。在本指南中,我們概述壓縮機的功能、您需要壓縮機的原因,以及您有哪些選擇。



Related articles

an illustration about compressor installation

Energy Recovery in Compressor Systems

Discover how energy from waste heat is recovered in water-cooled or air-cooled compressed air systems. We will take a look at the recovery potential and the different methods of energy recovery.