Our solutions
Industrial Tools & Solutions
Solutions
Industries Served
Industrial Tools & Solutions
Aerospace
Industries Served
Aerospace
Aerospace
Aerospace
Aerospace
Foundries & Metal Fabrication
Original equipment manufacturer
Industries Served
Original equipment manufacturer
Original equipment manufacturer
Original equipment manufacturer
Original equipment manufacturer
Industries Served
Industries Served
Products
Industrial Tools & Solutions
Air Line Infrastructure
Products
Air Line Infrastructure
Air Line Infrastructure
Air Line Infrastructure
Hoists & Trolleys
Products
Hoists & Trolleys
Hoists & Trolleys
Material removal tools
Products
Material removal tools
Material removal tools
Material removal tools
Material removal tools
Material removal tools
Material removal tools
Service
Industrial Tools & Solutions
Atlas Copco service solutions
Service
Atlas Copco service solutions
Atlas Copco service solutions
Atlas Copco service solutions
Learn from our experts
Máy nén khí
Solutions
Sản phẩm
Máy nén khí
Các giải pháp xử lý ngưng tụ trong ngành công nghiệp
Sản phẩm
Các giải pháp xử lý ngưng tụ trong ngành công nghiệp
Các giải pháp xử lý ngưng tụ trong ngành công nghiệp
Các giải pháp xử lý ngưng tụ trong ngành công nghiệp
Các giải pháp xử lý ngưng tụ trong ngành công nghiệp
Process Gas and Air Equipment
Phụ tùng và dịch vụ bảo dưỡng
Máy nén khí
Gói dịch vụ bảo dưỡng
Phụ tùng và dịch vụ bảo dưỡng
Gói dịch vụ bảo dưỡng
Gói dịch vụ bảo dưỡng
Phụ tùng máy nén khí
Tối đa hiệu suất
Phụ tùng và dịch vụ bảo dưỡng
Tối đa hiệu suất
Tối đa hiệu suất

The Tooth Compressor

Displacement Compressors Compressor Types Compressors Compressed Air Wiki

There are two ways of compressing air, dynamic and displacement compression. We are talking about the latter here. There are a lot of compressor types that classify as a displacement compressors. One of these types is the tooth compressor.

What are tooth compressors?

the tooth compressor

The compression element in a tooth compressor consists of two rotors that rotate in opposite directions inside a compression chamber. The compression process consists of intake, compression and outlet. During the intake phase, air is drawn into the compression chamber until the rotors block the inlet. During the compression phase, the drawn in air is compressed in the compression chamber, which gets smaller as the rotors rotate. The outlet port is blocked during compression by one of the rotors, while the inlet is open to draw in new air into the opposite section of the compression chamber.


Discharge takes place when one of the rotors opens the outlet port and the compressed air is forced out of the compression chamber. Both rotors are synchronized via a set of gear wheels. The maximum pressure ratio obtainable with an oil-free tooth compressor is limited by the limiting temperature difference between the inlet and the discharge. Consequently, several stages with inter-stage cooling are required for higher pressures.

Related articles

an illustration about the types of compressors for the atlas copco wiki.

The Screw Compressor

Learn more about air compression and the different types of displacement compressors we know today. Here we’re talking about oil-injected and oil-free twin screw compressors.