We have set a standard concerning our air purity. This is how we became the worlds first compressor manufacturer to receive multiple international certifications. We have received certifications for:
• ISO 22000 on our manufacturing process
•ISO 8573-1 CLASS 0 on the level of air purity
• ISO 7396-1-2007 on medical gas and pipeline systems
Additionally, we comply to the Good Manufacturing Practice paragraph D10 and in part 210 where it states that compressed air must be of appropriate purity, in our eyes this level of air purity can only be delivered by CLASS 0 machines.
We take pride in our reliability. This means giving our customers peace of mind by flow testing every single machine we produce to ensure its efficiency. Also, making sure our machines have the most optimal uptimes and if a problem occurs our global installed service which is spread over 180 countries will solve it as soon as possible.
About our services
Thanks to our experience in the global pharmaceutical industry, we can offer all compressed air technologies needed for each application in the pharmaceutical industry. We are a total offering supplier, meaning we have compressed air solutions for all your needs ranging from air compressors, dryers and filters, control systems and much more.
Salutas a German pharmaceutical production and logistics center in Barleben, switches to clean oil free air compressors. To increase quality, operational efficiency and safety
Oil free compressed air is used to clean and remove moisture from the packaging, bottle, tubes or cans, depending on the product.
Manufacturing of tablets & capsules
Compressed air comes into contact during almost every phase of the process. Mixing and granulation, drying, pressing, coating and packaging. Air must be CLASS 0 to avoid contamination.
Sterile air aerates a fermenter. The air cannot be contaminated, or the bacteria will be polluted and consequently the end product will not be of high quality.
Air is used for pneumatic conveying during the manufacturing process, this means it comes into contact with the product so the air must be clean. During the rest of the process compressed air is also used to control valves, sorting, polishing and more.
The water that is used during the manufacturing process has to be treated first or it could contaminate the product. After using the water it has to be treated too before it can be reused or released.
More on wastewater treatment