10 steps to a green and more efficient production

Carbon reduction for green production - all you need to know
10 steps to green compressed air production

Discover our solutions for wastewater treatment

We offer clean air technology that matches all your aeration needs. With high energy efficiency and low total cost of ownership.
Waste Water Treatment
Close

Cerades™: The future of desiccant dryers is here

August 7, 2024

Cerades™: The future of desiccant dryers is here


Ingenious design


Better and safer


Compact design


Futuristic

 

 

Estimated reading time: 5 minutes

As 2020 has shown, it is difficult to predict what will happen a few years – or even just a few months – down the road. The best plans can be upended by unforeseen circumstances. In these uncertain times, isn’t it nice that there are some areas in which we know what the future will hold?

cerades
One of them is desiccant dryers. Here, the future has just arrived … and it is called Cerades™ -- the world’s first solid desiccant. Even for a company like Atlas Copco, which is known for its innovation and ingenuity, the development of a revolutionary technology like Cerades™ is something special. It doesn’t just improve previous products; it eclipses them. Traditional adsorption dryers contain thousands of tiny beads of desiccant. These are made of activated alumina, molecular sieves or silica gel and dry the compressed air. The beads, which are similar to those found in the small packets used to keep new products dry, absorb and retain the moisture in the air. This is done by pushing the air through this mass of beads, which requires quite a bit of energy. In addition, because the desiccant decomposes, this process creates a fine dust that is a health and environmental hazard. Finally, the decaying beads could also lead to an air quality reduction and they require frequent maintenance. Following years of research and development, Atlas Copco has developed a desiccant that has none of these downsides. Let’s take a closer look at Cerades™ and how it is revolutionizing desiccant dryer technology.

Ingenious design

Instead of forcing the compressed air through thousands of beads, Cerades™ allows it to flow through straight, structured tubes. Because the air meets little resistance, the pressure drop is much lower and, as a result, a lot less energy is required to operate the dryer.

But the sharply reduced costs are just one benefit.

A better, safer dryer

When compressed air is pushed through traditional dryers, the desiccant beads bounce around and ultimately decompose. This creates a fine dust. If it is not filtered out, it can contaminate the air and downstream equipment. Filtering it out, on the other hand, results in higher operating costs and more waste.

In addition, this dust is a health and environmental hazard because it circulates in the ambient air when the desiccant is replaced and can harm service technicians and the operating personnel alike.

Cerades™ lasts much longer and eliminates the dust problem. This further reduces costs and delivers users ISO 8573-1:2010 Class 2 air purity for particles without any extra filtration.

A more compact design and greater versatility

The lack of loose, bouncing beads also makes Cerades™ vibration-resistant, which allows it to be mounted horizontally and ensures continuous operation in rigorous applications, for example in the transportation industry.

In addition, because it can handle inlet temperatures of up to 70°C, Cerades™ is the ideal desiccant for high ambient or inlet temperatures.

The future is now

CD+ dryer
Cerades™ is exclusively available now in the new Atlas Copco CD+ 20-335 adsorption dryer series. It not only boasts the benefits of the new desiccant but is also extremely powerful, efficient, reliable and quiet. Among the outstanding features of the CD+ is that it can operate continuously with 100% airflow – a significant advantage over most dryers, which only achieve between 70 and 80%. Compared to standard CD dryers, it also lowers the purge air reduction by 15%. While the CD+ 20-335 comes with a standard pressure dew point of -20°C/-5°F, -40°C/-40°F, users can adjust it to best meet their specific needs. An innovative silencing system ensures a particularly quiet performance with a minimal pressure drop.
Elektronikon touch controller
The CD+ series is equipped with the advanced Elektronikon® Touch controller. It features warning indications, dryer shutdown as well as maintenance scheduling, and allows users to easily maximize dryer performance and efficiency. Combined with SMARTLINK remote monitoring, users can optimize their dryers from practically anywhere. All of this adds up to an inevitable conclusion: In an uncertain world, Cerades™ is as much of a sure thing as you can find. A technology this revolutionary is bound to become the new standard in no time at all.
Get in touch!
Get in touch!
In short, Cerades™ really is a quantum leap in compressed air performance. Contact us and find out how it can boost your air system too…
 
In short, Cerades™ really is a quantum leap in compressed air performance. Contact us and find out how it can boost your air system too…
Learn more on the Cerades™ dryers
Cerades
Learn more on the Cerades™ dryers
Download the product leaflet
CD+ Desiccant compressed air dryers with Cerades technology CD +20-335. coverimage
Download the product leaflet

Everything you need to know about compressed air dryers. This whitepaper will give you a comprehensive overview of the different technologies and options available in the market. 

Do you need more help or do you have specific questions? Contact one of our experts by clicking the button below.

Cd (dryers) Desiccant air dryers Air and gas treatment

Cerades™: The future of desiccant dryers is here

contact icon

Cerades™: The future of desiccant dryers is here

explainer icon