Need help selecting the right tools for your application? Check out one of our buying guides to get started!
Buying Guides
Dimensional drawings, Safety Information, Product Instructions, Manuals and User Guides
Servaid

Time to calibrate?

Secure your quality and reduce defects through Tool Calibration and Accredited Quality Assurance Calibration.​
power tool calibration, tool testing, metrology, machine capability test

View all our industries

Our industries
Unlock a world of valuable insights without the spam: Subscribe to our monthly newsletter and stay ahead with the latest industry innovations, expert tips, and cutting-edge solutions tailored for your success.
Subscribe Today
In this series of educational videos, our ‘Lab Boss’ Jason Benford performs various torque tests to show off the power and durability Atlas Copco tools have to offer!
In the Lab
Close

Three important things you should know about drilling operations with handheld tools

3 minute(s) to read July 22, 2021

When it comes to work with handheld drilling tools professionally, some important and decisive factors must be consider to get a better result.

Decisive factors: Feed force, Cutting speed and Speed

drilling technique

An ordinary human being is incapable of achieving the feed forces used, for example, in a column drilling tool, except when small bit sizes are used. In hand drilling it is therefore necessary to reduce the feed force needed by selecting the correct bit and the application of a drilling technique. The speed at which the cutting edges penetrate through the material is called the cutting speed. It is zero in the center of the hole and highest in the periphery, which is also where it is measured. It is specified in meters per minute (m/min). Different types of material require different cutting speeds. 

The free speed of a drilling tool is specified in number of revolutions per minute (rpm) and is stated on the rating plate of the tool.

The drill bit

There are three points to keep in mind about the drill bit : the drill bit material, the drill bit surface treatment and the drill bit type. High speed steel is the most common material used in the manufacture of bits. Cemented-carbide bits are essential for highly abrasive materials, such as composites with reinforcement of fiber-glass, carbon fiber or kevlar fiber, to assure that they can be used for a reasonable length of time between resharpenings. By the other hand, the steam-tempered bits have less friction due to their smoother surface, so, the drilled material doesn’t stick so easily and also protects against corrosion. 

There are three types of drills and the rule is that they ground in different ways: jobber drill, quick spiral drill and slow spiral drill. What varies here is the angle and the material they are recommended for.

drilling technique 2

The drilling tool

Drilling Technique

When it comes to handheld drilling operations, it is required to have speed and precision. The machines also must be light and strong in order to avoid operator fatigue. Pneumatic drills are compact and lightweight so they are easy to hold and adapted to the hand and arm anatomy. There are basically 4 different types of drills: pistol grip drillsstraight drillsangle drills, and screw-feed drills. Each specific type of drill is appropriate for the working environment and it influences directly the ergonomics for the operator. Uncomfortable working postures are common in handheld drilling operations, but this problem can often be avoid by using the right type of tool.

Some examples below:

When drilling in a high position, use a straight drilling tool

When drilling in a high position, use a straight drilling tool

When drilling in a low position, use a pistol grip drilling tool

When drilling in a low position, use a pistol grip drilling tool
 

Related information

  • Aerospace

  • Automotive

  • Electronics

  • Energy

  • Foundries & Metal Fabrication

  • Government & Defense

  • Heavy Equipment & Machinery

  • Industrial Assembly

  • Original Equipment Manufacturer

  • Rail Industry

  • Shipbuilding