Our solutions
Atlas Copco Rental
Solutions
Utleiepark
Atlas Copco Rental
Nitrogengeneratorer
Oljefrie luftkompressorer
Utleiepark
Oljefrie luftkompressorer
Oljefrie luftkompressorer
Oljesmurte kompressorer
Utleiepark
Oljesmurte kompressorer
Oljesmurte kompressorer
Tilbehør
Utleiepark
Industrial Tools & Solutions
Solutions
Bransjer som betjenes
Industrial Tools & Solutions
Bransjer som betjenes
Bransjer som betjenes
Industriell montering
Luftfart
Bransjer som betjenes
Luftfart
Luftfart
Luftfart
Luftfart
Produkter
Industrial Tools & Solutions
Bearbeidende verktøy
Produkter
Bearbeidende verktøy
Bearbeidende verktøy
Bearbeidende verktøy
Bearbeidende verktøy
Bearbeidende verktøy
Bearbeidende verktøy
Monteringsverktøy og systemløsninger
Tilbehør til luftledninger
Produkter
Tilbehør til luftledninger
Tilbehør til luftledninger
Tilbehør til luftledninger
Service
Industrial Tools & Solutions
Atlas Copcos serviceløsninger
Service
Atlas Copcos serviceløsninger
Atlas Copcos serviceløsninger
Atlas Copcos serviceløsninger
Kompressorer
Solutions
Produkter
Kompressorer
Industrielle løsninger for kondensatbehandling
Produkter
Industrielle løsninger for kondensatbehandling
Industrielle løsninger for kondensatbehandling
Industrielle løsninger for kondensatbehandling
Industrielle løsninger for kondensatbehandling
Process Gas and Air Equipment
Service og deler
Kompressorer
Luftkompressordeler
Maksimer effektiviteten
Service og deler
Maksimer effektiviteten
Maksimer effektiviteten
Maksimer effektiviteten
Vakuumløsninger

The Tooth Compressor

Displacement Compressors Compressor Types Compressors Compressed Air Wiki

There are two ways of compressing air, dynamic and displacement compression. We are talking about the latter here. There are a lot of compressor types that classify as a displacement compressors. One of these types is the tooth compressor.

What are tooth compressors?

the tooth compressor

The compression element in a tooth compressor consists of two rotors that rotate in opposite directions inside a compression chamber. The compression process consists of intake, compression and outlet. During the intake phase, air is drawn into the compression chamber until the rotors block the inlet. During the compression phase, the drawn in air is compressed in the compression chamber, which gets smaller as the rotors rotate. The outlet port is blocked during compression by one of the rotors, while the inlet is open to draw in new air into the opposite section of the compression chamber.


Discharge takes place when one of the rotors opens the outlet port and the compressed air is forced out of the compression chamber. Both rotors are synchronized via a set of gear wheels. The maximum pressure ratio obtainable with an oil-free tooth compressor is limited by the limiting temperature difference between the inlet and the discharge. Consequently, several stages with inter-stage cooling are required for higher pressures.

Related articles

an illustration about the types of compressors for the atlas copco wiki.

The Screw Compressor

Learn more about air compression and the different types of displacement compressors we know today. Here we’re talking about oil-injected and oil-free twin screw compressors.