The WEDA D60SH drainage pump features a max head of up to 250ft, max flow of 260USgpm, and can withstand solids of up to 0.32in.
The WEDA drainage pumps handle either clean or sand-laden water, even with small solid particles, with the best performance and efficiency. These pumps are particularly suitable for general dewatering applications, ground water, raw water, construction sites and harsh conditions on site.
| Product Code | WEDA D60SH |
| Installation | Portable drainage pump |
| Hydraulic range | N - normal head H - high head SH - super high head |
| Insulation class | F (+155°C/+311°F) IEC 85 |
| Protection class | IP68 |
| Voltage variation | Max ± 5% of nominal voltage |
| Voltage imbalance | Max 2% - between phases |
| Max start-stop | Max 30 starts/hour |
| Cable | H07RN-F (20 m) or SOOW AWG (65 ft) |
| Casted parts | Corrosion resistant aluminum |
| Impeller | High chrome iron, 55±5 HRC |
| Wear parts | Rubber (NBR) |
| Strainer | Corrosion resistant aluminum |
| Shaft | Stainless steel |
| O-rings | Rubber (NBR) |
| Main bearing | Double row ball bearing in oil |
| Mechanical seal | Primary + secondary: SiC/SiC |
| Built-in controls and protection | contactor + control relay |
| Thermal contacts | 140°C / 284°F |
| Options / accessories | Float switch Zinc anodes Epoxy coating Quick couplings (hose / NPT / ISO-G / Camlock / Storz) Pump raft Terminal board Softstarter NSSHÖU screened cable Slim adapter |
| Solids handling, strainer hole | 0.31 in |
| Liquid temperature | Max 104°F |
| Depth of immersion | Max 65 ft |
| Max liquid specific gravity | 1.1 |
| pH of the pumped liquid | pH 5–8 |
| Weight and dimensions | N - Normal Head |
| Discharge connection (in) | 3 |
| Hieght (in) | 29.9 |
| Width (in) | 11.9 |
| Diameter (in) | 10.9 |
| Diameter (in) | 138 |
| Rating | 3 ph | Standard Cable |
| Power P1 | 9.9 kW | |
| Power P2 | 11.5 HP | |
| Shaft speed | 3500 r.p.m. | |
| 230 V | 29 A | AWG8 |
| 460 V | 14.5 A | AWG10 |
| 575 V | 11.2 A | AWG12 |
WEDA D60SH Drainage Pump is used for various general dewatering purposes on construction sites. During construction, it is crucial to remove shallow water and groundwater to keep the project on schedule. Overall, the Atlas Copco D60SH Pump is portable and easy to move from site to site.
Quarries require dewatering for a variety of reasons. In order to mine the aggregate for concrete and other construction materials, it needs to be sufficiently dry at the quarry. The D60SH Pump can provide the dry sump needed for proper working conditions.
