The PAC F1212 VD 285HP T4F for high-pressure applications, have been designed to reduce downtime and prolong lifespan, saving operational costs.
This centrifugal pump can handle liquids containing solids of up to 3.5" in size. This makes it particularly well suited to industrial applications, such as water transfer in the oil and gas sector, quarrying and surface mining, construction, and municipal applications.
Even with suction heights of several feet the machine rapidly evacuates the air from the suction pipe and starts to pump. Additionally, thanks to the enclosed impeller, the PAC range is also suitable for pumping liquids with solids in suspension with best possible efficiency.
View and/or Download PAC F1212 VD 285HP T4F: Datasheet
|Q max eff.||6,715 USgpm|
|Suction port||12" Flange - ANSI class 150|
|Delivery port||12" Flange - ANSI class 150|
|Impeller type||Enclosed, 2 vane|
|Casing||ASTM A536 ductile iron|
|Impeller||ASTM A743 CA6NM|
|Wear ring||ASTM A48 Class 20 cast iron|
|Shaft||AISI 630 stainless steel|
|Mechanical Seal faces||Silicon carbide Vs Silicon carbide|
|Check Valve||ASTM A536 ductile iron + NBR rubber flap|
|Vacuum pump type||Diaphragm|
|Nominal air capacity||50.0 cfm|
|Max vacuum||- 26.6 inHg|
|Model||TAD 872 VE|
|Type||Diesel turbo common rail|
|Displacement||7.7 Liter (470 in³)|
|Cooling||Liquid with radiator|
|Max operating speed||1,600 rpm|
|US emissions||EPA Tier 4F|
|Engine system voltage||12 V|
|Engine Power rating||285 HP|
|Automatic operation: start-stop with transducers or floats|
|Material||ASTM A36 steel|
|Coatings||Epoxy powder, average thickness of 3 MIL|
|Features||Lifting beam. Fork lift pockets.|
|Battery||Acid charge Pb-Ca maintenance free, 12V - 1,150 CCA|
|Fuel tank capacity||119 USG|
|Fuel consumption||13.5 US Gal/hr @1,600 rpm @73% eff.|
|Dry weight||7,720 lbs|
|Wet weight||8,950 lbs|
|Speed||Impeller Dia.||Style||Solids Dia.||Ns||Suction||Discharge||No. Vanes|
|Various||17" / 440 mm||Enclosed||3.5" / 89 mm||1,600 rpm||12" / 300 mm||12" / 300 mm||2|
The 17" impeller with 74% efficiency at B.E.P. provides best pumping result with minimal efforts
Closed impeller type with solids handling capability of 3.5" for trouble free operation
|External fuel valve connection
Extended fuel autonomy with standard equipped fuel valve connection
Large doors for superior access and fast service
|Always in control
Suction and discharge gauges visibly located to be always in control
Bypass pumping involves maneuvering liquid (sewage, trash, water, etc.) around a damaged pipe without interrupting the flow of liquid while the repairs are underway. This process is critical for many rehab projects, as it allows for a pipe to be repaired or replaced without spillage on public or private property. Bypass pumping uses a PAC H, which is a centrifugal pump that can handle liquids containing solids of up to 3.5". Because of this, the PAC H pump is well suited for bypassing in construction, industrial, and municipal applications.
Bypass is common in these sectors:
Site dewatering is the process of taking and removing water from construction sites, quarries, mine shafts, or any other area. Extracting water from these areas is crucial to maintain a safe working environment as well as reduce any costly delays.
Due to the PAC's ability to handle pumping high volumes, this pump is able to displace not only water, but sewage, industrial waste, chemicals, and even some solid products.
Areas for site dewatering :
Whether it is a hurricane, flood, natural disaster or sewer line collapse; Atlas Copco PAC F pumps are up to the challenge. The PAC F is a centrifugal pump that can handle liquids containing solids of up to 3.5" in size, which makes it well suited for any emergency.
Emergency Response is common in these sectors: