The PAC F88 Atlas Copco pump is designed to withstand toughest applications and delivers best in class pumping efficiency. One of the most common area of utilization is the mining and Oil & Gas segment where reliability, efficiency and versatility is the key to provide a customized solution. Other suitable applications within Construction and General dewatering, Municipal as well as General Industry are ideal for the PAC F88 pump. Atlas Copco pumps are packed with features that not only meet, but exceed the needs of our customers.
| Pump | |
|---|---|
| Model | PAC F88 E 150HP |
| Qmax | 3950 USgpm |
| Hmax | 200 ft |
| Q max eff. | 3100 USgpm |
| Eff. max | 82% |
| Suction port | 8" Flange - 150# ANSI |
| Delivery port | 8" Flange - 150# ANS |
| Impeller type | Closed, 2 vane |
| Impeller diameter | 12" |
| Solids handling | 3" |
| Material | |
| Casing | ASTM A536 ductile iron |
| Impeller | ASTM A536 ductile iron |
| Wear Plate | ASTM A48 Class 20 grey iron |
| Shaft | ASTM A48 Class 20 grey iron |
| Mechanical Seal faces | Silicon carbide / Silicon carbide / VITON |
| Elastomers | NBR + VITON |
| Lubrication | Grease (bearings) |
| Check Valve | ASTM A536 ductile iron + NBR rubber flap |
| Separator | Aluminium alloy |
| Priming System | |
| Vacuum pump | |
| Vacuum pump type | Diaphragm |
| Nominal air capacity | 50 cfm |
| Max vacuum | - 26.6 inHg |
| Drives | Link belt |
| Engine | |
|---|---|
| Make | Weg |
| Type | Three Phase Induction Motor |
| Cooling method | IC411 - TEFC |
| No. poles | 4 |
| Tension supply | 460 V |
| Frequency | 60 Hz |
| Rated power | 150 HP |
| Rated speed | 1,784 rpm |
| Rated current | 116 A |
| Efficiency class | W22 NEMA premium efficiency |
| Max efficiency | 95.4 % |
| Protection rating | IP55 |
| Insulation class | F |
| Thermal protection | Thermistors 2 Wires - 311degF |
| Duty cycle | Continuous - S1 |
| Arrangement | |
| Technical data | |
| Material | ASTM A36 steel |
| Coatings | Epoxy powder, average thickness of 3 MIL |
| Features | Lifting beam. Fork lift pockets. Pump access through hinged door. |
| Dry weight | - lbs |
| Speed | Impeller Dia. | Style | Solids Dia. | Ns | Suction | Discharge | No. Vanes |
| Various | 12" / 315 mm | Closed | 3" / 76 mm | 2000 rpm | 8" / 200 mm | 8" / 200 mm | 2 |
| Efficiency The 12" impeller with 82% efficiency at B.E.P. provides best pumping result with minimal efforts |
Solids handling Closed impeller type with solids handling capability of 3" for trouble free operation |
Easy maintenance Hinged cover for direct access to the impeller and pump volute |
Water transfer refers to the moving of water from a high saturated area to a low saturated area. The PAC H is a centrifugal pump that can handle liquids containing solids of up to 3" in size, which makes it well suited for water transfer in the oil and gas sector, quarrying and surface mining, construction, and municipal applications.
The PAC H pump's design benefits make them well suited for water transfer. These pumps are able to be used often and on jobs where pumps must run continuously.
Water transfer is common in these sectors:
Site dewatering is the process of taking and removing water from construction sites, quarries, mine shafts, or any other area. Extracting water from these areas is crucial to maintain a safe working environment as well as reduce any costly delays.
Due to the PAC's ability to handle pumping high volumes, this pump is able to displace not only water, but sewage, industrial waste, chemicals, and even some solid products.
Areas for site dewatering :
Whether it is a hurricane, flood, natural disaster or sewer line collapse; Atlas Copco PAC F pumps are up to the challenge. The PAC F is a centrifugal pump that can handle liquids containing solids of up to 3" in size, which makes it well suited for any emergency.
Emergency Response is common in these sectors:
