Performance | Units | QAS 25 JD |
Frequency | Hz | 60 |
Rated prime power @480V 3ø | kW/kVA | 20/25 |
Rated standby power @480V 3ø | kW/kVA | 22/28 |
3ø Power factor | 0.8 | |
3ø Voltage in 480V switch position (Series Star w/ Neutral) | V | 480Y / 277 |
Amp capacity @480V | A | 30 |
3ø Voltage in 240-208V switch position (Parallel Star w/ Neutral) | V | 240YY / 139-208YY |
Rated Prime Power @240V 3Ø |
A | 20/25 |
Amp capacity @240V | A | 60 |
Rated Prime Power @ 2080V 3Ø |
kW/kVA | 18/23 |
Amp capacity @208V | A | 63 |
Rated prime power @240V 1ø | kW/kVA | 13/13 |
1ø Power factor | 1 .0 | |
1ø Voltage in 120-240V switch position (Zig-Zag) | V | 240 / 120 |
Amp Capacity @240V | A | 54 |
Amp Capacity @120V | A | 54 x 2 |
Alternator (4 Pole, 12 Wire) | Leroy Somer | LSA 40 M5 |
Excitation system | AREP (auxiliary winding) | |
Digital Automatic Voltage Regulator (+/- 0.25%) |
Leroy Somer | D350 |
Insulation | Class H | |
Main Breaker - Shunt Trip | A | 63 |
Power Distribution – Terminal Board | 5 Wire (L1, L2, L3, N, Ground) | |
Terminal Board Connections | Bare Wire Terminals | |
Maximum Terminal Cable Size | 350MCM | |
Convenience Receptacles | 2 x NEMA 5-20R & 2 x 125/250V 50A CS6364 |
The WEDA L100N slurry pump features a max head of up to 108ft, max flow of 1320USgpm, and can withstand solids of up to 2.4in.
The WEDA slurry pumps are the toughest and have the largest apertures to facilitate handling of slurry with the most challenging solids. These pumps are specially designed to operate in quarries, dredging and settling ponds, dealing with abrasive media with high solids content.
Specifications | 3ph | |
Max. head | ft | 108 |
Max. flow | US gpm | 1320 |
m3/hr | 304 | |
Rated output | hp | 60 |
Max. power input | kW | 65 |
Discharge connection | in | ASME 6" 150lb |
Max solid handling | in | 2.4 |
Product Code | Weda L100N |
Installation | Portable |
Discharge connection | DN150/ANSI 6 in/DIN |
Hydraulic range | N - Normal Head |
Solid handling | Max. solids 60 mm 2.4 in |
Liquid temperature | max 95°F (35°C), standard |
pH of the liquid pumped | pH 4-10 |
Frequency | 60 Hz |
Number of poles | 4 |
Insulation class | H |
Portection class | IP68 |
Thermal contacts | 230°F (110°C) |
Cable | H07RN-F 4G35/TYPE W 4xAWG2 |
Cable length | 65 ft (20m) |
Outer casing | CI Alloy |
Impeller | Cr Alloy CI |
Wear parts | Cr Alloy CI |
Stator housing | CI Alloy |
Strainer | Steel |
Shaft | Stainless steel |
O-rings | Viton |
Discharge connection | Steel |
Bearings | Heavy Duty Bearings |
Motor Side Seals | 2 lip seals (BUNA) |
Impeller Side Seals | 5 lip seals (3 BUNA + 2 PTFE) + 1 V-RING (TPU) |
Discharge | Flange |
Start type | Direct-on-line |
Weight and dimensions | |
Weight (lb) | 2233 |
Hieght (in) | 63.2 |
Width (in) | 36.8 |
Diameter (in) | 21.5 |
Rating | 3 ph |
Power P1 | 49 kW (65 HP) |
Power P2 | 45 kW (60 HP) |
Shaft speed | 76 A |
460 V | 1150 r.p.m. |
WEDA L100N slurry pumps' high abrasion resistance makes them an excellent choice for industrial slurries.
Slurry pumps for dredging are used to remove contaminants from water, move sediment, create waterways, and mine for metals. The WEDA L100N pump is designed for the toughest applications thanks to its high durability and abrasion resistance.