GHS với công nghệ VSD
Bơm chân không thông minh và cải tiến mới của chúng tôi - Dòng sản phẩm bơm chân không trục vít GHS VSD⁺ có công suất đến 5004 m³/giờ - là một bước tiến tới trước thực sự trong ngành chân không.
Region: Porsgrunn, Norway
Sector: Construction
Benefit: Up to 50% energy savings
Isola believes in producing products and construction materials that contribute to a better environment. The process of making those products is important as well. Through the development of their insulation materials, they seek to simplify everyday life for the end-users of their products. Sustainability and energy-efficiency are core targets they seek to achieve in their daily production operations.
Isola used two roots blower vacuum pumps that were consuming considerable energy and high levels of heat. Being located close to a residential area, the noise generated from these pumps at their production site was an environmental and well-being challenge.
To meet their goal of energy-efficient and sustainable practices, Isola chose the Atlas Copco GHS 2002 VSD⁺ oil-sealed screw vacuum pump with HEX@™ controller.
The GHS 2002 VSD⁺ features a new design for better performance, optimal oil separation, a smaller footprint, and the innovative new HEX@™ vacuum pump controller. Vacuum is needed for extrusion and thermoforming processes. The level of vacuum required is variable depending on the status of the process. The variable speed of the GHS VSD⁺ pumps are an ideal solution since they have great turndown ratio linked to increased energy efficiency.
Due to the high temperature of these processes, Atlas Copco recommended the Energy Recovery System that allows Isola to recover the dissipated heat. Most of the electrical energy that is used by a vacuum solution is converted into heat - up to 90%. The integrated energy recovery system can recover up to three quarters of that power input in the form of hot water.
Due to the Industry 4.0 capabilities of the GHS VSD⁺ series, Isola can remotely consult the status of their Atlas Copco GHS 2002 VSD⁺ oil-sealed screw vacuum pump and HEX@™ controller vacuum system, start, and stop the machine, or change the setpoint via any device, for instance their smartphone or their PC.
They just need to connect the vacuum pump by LAN to the company’s network to access the pump’s user interface.
In line with Isola’s production philosophy, the Atlas Copco GHS VSD+ vacuum pumps deliver efficient vacuum with minimal impact on the environment. The new installation is very quiet, around 30dB less than the previous installation. Atlas Copco not only keeps Isola happy, but the neighbors too. In addition, Isola can reduce their energy usage whilst using the energy to heat the water needed for their production facility.
Since Isola’s need for vacuum fluctuates depending on different factors such as process changes or even the time of day. The variable speed technology allows these pumps to closely follow that demand. No unnecessary vacuum is produced, no energy is wasted.
With the arrival of the HEX@™ controller the system can be monitored remotely and allows the Atlas Copco team to assist whenever needed. Equipped with the latest generation controller HEX@™, Isola benefits from the connected controller. Their system can be monitored remotely and allows the Atlas Copco team to assist whenever needed. Isola can expect extra energy cost savings and a high return on their investment. With Atlas Copco’s intelligent vacuum solutions, they can continue their operations in a sustainable manner.
Bơm chân không thông minh và cải tiến mới của chúng tôi - Dòng sản phẩm bơm chân không trục vít GHS VSD⁺ có công suất đến 5004 m³/giờ - là một bước tiến tới trước thực sự trong ngành chân không.
21 tháng chín, 2022
Noelle + von Campe sản xuất vật liệu đóng gói thủy tinh riêng lẻ cho các công ty đóng chai. Chai và lọ riêng biệt có được hình dạng và phần hoàn thiện cuối bằng cách sử dụng công nghệ chân không.
6 tháng chín, 2020
Bơm chân không trục vít được bịt kín bằng dầu GHS VSD⁺ của Atlas Copco được Liên đoàn Công nghiệp Ấn Độ trao giải Innovative and Energy Saving Product of the Year 2020.
Cách nhanh nhất và hiệu quả về năng lượng nhất để đúc khuôn và sản xuất thủy tinh là gì? Đó là với chân không. Tìm hiểu xem dây chuyền sản xuất thủy tinh của bạn cần bơm chân không nào để đạt hiệu suất tốt nhất có thể.
17 tháng chín, 2019
Nhà sản xuất thủy tinh ở Thổ Nhĩ Kỳ sản xuất kính tầm, đồ đạc bằng thủy tinh, bao bì thủy tinh và hóa chất, bao gồm hợp chất soda-chromium.
26 tháng tư, 2016
La Molisana là một trong những xưởng làm pasta cổ nhất nước Ý, trong hơn một thế kỷ. Được thành lập vào năm 1912 ở Campobasso, Ý, La Molisana hiện sản xuất hơn 40,000 gói pasta mỗi ngày.