The Atlas Copco XAS 185 KDU T4F is a single-stage oil-injected rotary screw type air compressor, powered by a liquid- cooled, four cylinder diesel engine.
The unit consists of an air end, diesel engine, cooling circuit, air/oil separation and control systems - all enclosed with an 1000 hour salt spray tested zinc rich primer steel canopy enclosure.
It is in a Utility Mounted enclosure designed for mounting on truck decks, factory and locally installed options are available.
Special attention has been given to the overall product quality, user friendliness, ease of serviceability, and economical operation to ensure best in class cost of ownership.
| Actual free air delivery (FAD) | Cfm | 185 |
| Normal effective working pressure | Psi | 100 |
| Maximum unloading pressure | Psi | 125 |
| Minimum working pressure | Psi | 58 |
| Max. sound pressure level @ 23’ (7m) at normal working speed & pressure | dB(a) | 76 |
| Compression Stages | 1 | |
| Air receiver capacity | US Gal (L) | 4.5 (17) |
| Compressor oil capacity | US Gal (L) | 2.3 (8.7) |
| Approximate air outlet temperature | °F (°C) | 200 (93) |
| Air Compressor outlets | 1 x 11⁄4” NPT | |
| Max. ambient temperature (at sea level) | °F (°C) | 120 (50) |
| Max altitude | ft(m) | TBA |
| Minimum starting temperature (without cold weather options) | °F (°C) | 14 (-10) |
| Minimum starting temperature (with cold weather options) | °F (°C) | -13 (-25) |
| Engine | Kubota | V2403-CR-E4B |
| Emissions Regulation | US EPA | Tier 4 Final |
| US EPA Engine Family | EKBXL02.4END | |
| Output at rated speed (2700 rpm) | HP | 49 |
| Number of cylinders | 4 | |
| Aspiration | Naturally aspirated | |
| Displacement | cu in (L) | 147 (2.4) |
| Engine Speed (Unloaded) | rpm | 1600 |
| Engine Speed (Maximum loaded) | rpm | 2700 |
| Engine oil capacity | US Gal (L) | 2.5 (9.5) |
| Engine coolant capacity | US Gal (L) | 2.5 (9.5) |
| Fuel tank capacity | US Gal (L) | 25 (95) |
| Fuel consumption at 0% load | Gal/Hr (L/Hr) | 0.93 (3.52) |
| Fuel consumption at 100% load | Gal/Hr (L/Hr) | 2.37 (8.97) |
| Electrical System (Negative Ground) | V | 12 |
| Battery Capacity (Cold Cranking Amps) | A | 1100 |
A compressor like this can be utilized both for larger remodel installations as well as smaller home framing projects. The XAS 185 KDU is the ideal compressor if you want a lot of power from a unit that requires very little maintenance.
Using the XAS 185 KDU Compressor, power up any tool with maximum torque, including impact wrenches, nailers, grinders, and more. Onsite repairs can be addressed in no time with practically any air tool in your kit.
Construction sites are especially susceptible to flat tires since loose screws and nails damage tires and puncture them. Fixing a flat tire quickly is easy with our air compressor.
With Atlas Copco's XAS 185 KDU Compressor connected to a sand blaster, most surfaces can be cleaned quickly and efficiently of paint, rust, and oxidation residues. Ensure surfaces are ready for construction, painting, or maintenance.
