Close

Post Drivers & Pullers

The hydraulic post and ground rod drivers can be used to drive road barriers, signposts, fences, and anchors. This is available with a built-in on/off valve or hose mounted remote on/off valve. With the hydraulic post puller, you can remove any pole, steel beam or tube with diameters up to 7.8 inches / 200 mm.

FEATURES & BENEFITS

High Performance
Wooden or Steel Post Multiple Driving Applications Get a ten Ton Grip Accessories
This post puller develops six tons of hydraulic pulling force. With the help of an optional separate hand lever, you boost the pulling force by an extra of four tons. With hardened jaws and an automatic chain-tightening clamp, this post puller is ideal for removing all kinds of wooden or steel posts including IPE, HPE; UPE profiles and round/square steel tubes with diameters of up to 200 mm (8 in). Post drive pullers can drive road barriers, tubes/profiles, signposts, fences, anchors, and ground rods. Our post puller is your best choice when removing hard-to-reach crash barriers and road signs. Available with a variety of accessories, giving each tool the utmost flexibility for any project.

LPD LD Driver

Light duty post driver with high frequency and hitting power. The post driver is a perfect match for driving ground rods, anchors, tent spikes and fences down in most ground conditions.
Activation Type   By Trigger Level
Weight lbs 38.58
Impact Rate BPM 2300
Driving Capacity mm 10-60

Learn More

LPD Driver

Post drivers are used for driving in road barrier tubes, profiles, sign posts, fences and a wide range of anchors. The post drivers provide stable, powerful, high speed driving for a variety of post sizes.
Activation Type   By Trigger Level
Weight lbs 70.54
Impact Rate BPM 1680
Driving Capacity mm 40-100

Learn More

LPD HD Driver

Heavy duty post driver with trigger lever activation. Post drivers are used for driving in road barrier tubes, profiles, sign posts, fences and a wide range of anchors. The post drivers provide stable, powerful, high speed driving for a variety of post sizes.
Activation Type   By Trigger Level
Weight lbs 70.54
Impact Rate BPM 1680
Driving Capacity mm 40-100

Learn More

LPP 10 Puller

The post puller is used by road-mainenace contractors to repair barriers. With hardened jaws and automatic chain tightening clamp, the Atlas Copco post puller is ideal for removing all kinds of wooden or steel posts.
Working Pressure psi 1,450-2,321
Weight lbs 132
Pulling Force lbs 13,228
Lift Capacity per Stroke mm 12-200

Learn More