Our solutions
Βιομηχανικά εργαλεία και λύσεις συναρμολόγησης
Solutions
Service
Βιομηχανικά εργαλεία και λύσεις συναρμολόγησης
Expert Hub
Βιομηχανικά εργαλεία και λύσεις συναρμολόγησης
Products
Βιομηχανικά εργαλεία και λύσεις συναρμολόγησης
Power Equipment
Solutions
Αεροσυμπιεστές
Solutions
Προϊόντα
Αεροσυμπιεστές
Προϊόντα και λύσεις
Solutions
Αεροσυμπιεστές
Προϊόντα και λύσεις
Αεροσυμπιεστές για ναυτιλιακές εφαρμογές
Εξοπλισμός επεξεργασίας αερίων και αέρα
Σέρβις και εξαρτήματα
Προϊόντα και λύσεις
Δράπανα
Προϊόντα και λύσεις
Στόλος ενοικιαζόμενων μηχανημάτων
Προϊόντα και λύσεις
Accessories
Στόλος ενοικιαζόμενων μηχανημάτων
Air
Nitrogen
Στόλος ενοικιαζόμενων μηχανημάτων
Offshore equipment
Steam
Στόλος ενοικιαζόμενων μηχανημάτων
Εξυπηρετούμενες βιομηχανίες
Συστήματα αποθήκευσης ενέργειας
Ελαφρύς εξοπλισμός κατασκευών και κατεδαφίσεων
Ηλεκτρογεννήτριες

The Tooth Compressor

Displacement Compressors Compressor Types Compressors Compressed Air Wiki

There are two ways of compressing air, dynamic and displacement compression. We are talking about the latter here. There are a lot of compressor types that classify as a displacement compressors. One of these types is the tooth compressor.

What are tooth compressors?

the tooth compressor

The compression element in a tooth compressor consists of two rotors that rotate in opposite directions inside a compression chamber. The compression process consists of intake, compression and outlet. During the intake phase, air is drawn into the compression chamber until the rotors block the inlet. During the compression phase, the drawn in air is compressed in the compression chamber, which gets smaller as the rotors rotate. The outlet port is blocked during compression by one of the rotors, while the inlet is open to draw in new air into the opposite section of the compression chamber.


Discharge takes place when one of the rotors opens the outlet port and the compressed air is forced out of the compression chamber. Both rotors are synchronized via a set of gear wheels. The maximum pressure ratio obtainable with an oil-free tooth compressor is limited by the limiting temperature difference between the inlet and the discharge. Consequently, several stages with inter-stage cooling are required for higher pressures.

Related articles

an illustration about the types of compressors for the atlas copco wiki.

The Screw Compressor

Learn more about air compression and the different types of displacement compressors we know today. Here we’re talking about oil-injected and oil-free twin screw compressors.

Check out our wide range of reliable, energy-efficient and cost-effective air compressors. For all your low, medium and high pressure applications.